This review article provides a comprehensive analysis of current literature sources addressing the formation processes of microplastics and nanoplastics in the environment, as well as assessing their negative impact on ecosystems and human health. Special attention is given to ... Read More
Three-component interpolyelectrolyte complexes based on Bombyx mori chitosan were synthesized, and their compositions and hydrodynamic dimensions were characterized. It was established that, at pH 6.3, binary chitosan/collagen complexes interact with sodium carboxymethylcellulose in a mass ratio of 1:0.2:0.65. Additionally, ... Read More
The synthesis of chitosan nanoderivatives with various acids in the presence of sodium tripolyphosphate stabilizer was carried out using the ionotropic gelation method. The effects of the component ratios of chitosan and hydrochloric and acetic acids on the formation ... Read More
In this study, tricarboxycellulose samples were synthesized through the sequential oxidation of cellulose, woven gauze, and medical cotton using NaClO, NaIO₄, and H₂O₂. The resulting materials were thoroughly characterized in terms of their physicochemical and sorption properties. The oxidation ... Read More
This study establishes a direct quantitative link between rheological parameters and nanofiber structure. As the concentration increased, a significant transition from viscous to elastic-dominant behavior was observed, indicating the formation of a more interconnected polymer network. Electrospinning was subsequently ... Read More
In this study, nanofibers based on polyacrylonitrile (PAN) fiber "Nitron" were fabricated using the electrospinning method from a dimethylformamide (DMF) solution. The resulting nanofibers were subsequently coated with a polyaniline (PANI) layer to enhance their functional properties. Scanning electron ... Read More
This study is devoted to studying the mechanical properties of nanocomposites by introducing and increasing the proportion of nanocalcium carbonate (nano-CaCO₃) into polyethylene as an alternative to fillers. Polyethylene nanocomposites were obtained by incorporating industrially used 80 nm nanocalcium ... Read More
The long-term operational stability of perovskite solar cells (PSCs) remains a critical challenge for their commercialization, as device performance is often compromised by intrinsic degradation processes that are masked in ambient environments. Here, we systematically investigate the stability of ... Read More
This study analyzes the application possibilities of solid carbon residues (char) formed as a result of polymer waste pyrolysis as adsorbent materials and coke. The article examines activated carbon production methods, physical-chemical properties, and industrial applications. Research results indicate ... Read More
Dear scientists, colleagues!
We inform you that according to Decision № 355/5 dated June 7, 2024, and № 357
dated Jule 3, 2024 of the Higher Attestation Commission under the Ministry of Higher Education,
Science and Innovation of the Republic of Uzbekistan the journal "Uzbekistan Journal of Polymers"
is included in the List of Recommended Scientific Editions for Publication of Basic
Scientific Results of Dissertations by Supreme Attestation Commission of the Republic
of Uzbekistan for Doctor of Philosophy (PhD) and Doctor of Science (DSc) in
the specialties: chemical sciences (02.00.00), pharmaceutical sciences (15.00.00),
physical and mathematical sciences (01.00.00) and technical sciences (05.00.00)
Regards
Editorial Office
Uzbekistan Journal of Polymers
"Uzbekistan Journal of Polymers" articles are available online as soon as the production process is complete. The currently opened issue will be updated regularly until it is complete. To keep abreast of new articles, you may either visit this page regularly or subscribe to our E-mail alert :
Dear scientists, colleagues!
We inform you that according to Decision № 355/5 dated June 7, 2024, and № 357
dated Jule 3, 2024 of the Higher Attestation Commission under the Ministry of Higher Education,
Science and Innovation of the Republic of Uzbekistan the journal "Uzbekistan Journal of Polymers"
is included in the List of Recommended Scientific Editions for Publication of Basic
Scientific Results of Dissertations by Supreme Attestation Commission of the Republic
of Uzbekistan for Doctor of Philosophy (PhD) and Doctor of Science (DSc) in
the specialties: chemical sciences (02.00.00), pharmaceutical sciences (15.00.00),
physical and mathematical sciences (01.00.00) and technical sciences (05.00.00)
Regards
Editorial Office
Uzbekistan Journal of Polymers